HEAT PRESS INSTRUCTIONS
Set your heat press to a temperature between 315°F and 325°F. This range works well for both cotton and polyester fabrics, ensuring a strong bond without causing harm to the material or the transfer.
Lay your garment flat on the heat press and position the DTF transfer in the desired location.
Adjust the pressure according to your press type: for air compressor models, use 70-80 psi; for electric presses, set it to level 4; and for manual presses, apply firm and consistent pressure.
Press the transfer onto the garment for 6-12 seconds. This short yet firm press is sufficient to create a strong bond.
Once the press opens, immediately peel the film away from the transfer to reveal the design. This quick peel technique helps achieve a clean and precise finish. While adjustments may be necessary for specific transfers, this method typically delivers excellent results.
My Wishlist
Wishlist is empty.
Compare
Shopping cart